$1,438.91
Original: $4,111.17
-65%UK Cylinders 500L FlowCyl Standard Cylinder—
$4,111.17
$1,438.91The Story
UK Cylinders 500L FlowCyl Standard Cylinder (FCHPD4500) is a large-capacity, unvented hot water cylinder designed for high-demand homes and light commercial properties. Built in the UK from high‑grade stainless steel and fully insulated, it delivers powerful mains‑pressure hot water with excellent efficiency.
Key Features
- 500 litre capacity – ideal for multiple bathrooms and high, simultaneous hot water demand.
- High quality stainless steel – Duplex stainless steel construction for long life and corrosion resistance.
- 50 mm polyurethane insulation – 100% CFC/HCFC‑free foam and a 100% recyclable silver casing for low standing heat losses and a tidy plantroom finish.
- Part L compliant – highly insulated and designed to meet current Building Regulations energy efficiency requirements.
- 25-year cylinder warranty – supplied with a 25‑year manufacturer cylinder warranty and 2‑year parts warranty (terms apply).
- WRAS approved, ISO 9001 manufacture – independently approved product from a quality‑certified UK manufacturer.
Kit Contents
- Cold water inlet control set.
- Two‑port zone valve (recommended to swap for a Mut Meccanica Tovo SV for optimum reliability).
- High‑limit thermostat.
- Tundish.
- 3 kW immersion heater.
- Temperature and pressure relief (T&P) valve.
- Expansion vessel and wall bracket.
Technical Specifications
| General | |
|---|---|
| Product code | FCHPD4500 |
| Capacity | 500 litres |
| Dry weight | 92 kg |
| Weight full | 592 kg |
| Height | 1.98 m (approx. 1975–1980 mm) |
| Diameter | 690 mm |
| Cylinder warranty | 25 years |
| Parts warranty | 2 years |
| Hydraulic & Performance | |
| Hot and cold connectors | 28 mm |
| Sensor probe pocket | 12 mm |
| Primary coil surface area | 4.0 m² |
| Primary coil rating | 54 kW (typical) |
| Standing heat loss | 2.42 kWh/24 h |
| ERP efficiency band | C |
Design & Application
- Optimised for use with modern low‑temperature heat sources, providing excellent heat transfer via a large surface‑area primary coil.
- Suitable for larger domestic systems or small commercial applications requiring high draw‑off at mains pressure.
- Supplied as a complete unvented package and intended for installation by a G3‑qualified engineer in accordance with UK Building Regulations.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
UK Cylinders 500L FlowCyl Standard Cylinder (FCHPD4500) is a large-capacity, unvented hot water cylinder designed for high-demand homes and light commercial properties. Built in the UK from high‑grade stainless steel and fully insulated, it delivers powerful mains‑pressure hot water with excellent efficiency.
Key Features
- 500 litre capacity – ideal for multiple bathrooms and high, simultaneous hot water demand.
- High quality stainless steel – Duplex stainless steel construction for long life and corrosion resistance.
- 50 mm polyurethane insulation – 100% CFC/HCFC‑free foam and a 100% recyclable silver casing for low standing heat losses and a tidy plantroom finish.
- Part L compliant – highly insulated and designed to meet current Building Regulations energy efficiency requirements.
- 25-year cylinder warranty – supplied with a 25‑year manufacturer cylinder warranty and 2‑year parts warranty (terms apply).
- WRAS approved, ISO 9001 manufacture – independently approved product from a quality‑certified UK manufacturer.
Kit Contents
- Cold water inlet control set.
- Two‑port zone valve (recommended to swap for a Mut Meccanica Tovo SV for optimum reliability).
- High‑limit thermostat.
- Tundish.
- 3 kW immersion heater.
- Temperature and pressure relief (T&P) valve.
- Expansion vessel and wall bracket.
Technical Specifications
| General | |
|---|---|
| Product code | FCHPD4500 |
| Capacity | 500 litres |
| Dry weight | 92 kg |
| Weight full | 592 kg |
| Height | 1.98 m (approx. 1975–1980 mm) |
| Diameter | 690 mm |
| Cylinder warranty | 25 years |
| Parts warranty | 2 years |
| Hydraulic & Performance | |
| Hot and cold connectors | 28 mm |
| Sensor probe pocket | 12 mm |
| Primary coil surface area | 4.0 m² |
| Primary coil rating | 54 kW (typical) |
| Standing heat loss | 2.42 kWh/24 h |
| ERP efficiency band | C |
Design & Application
- Optimised for use with modern low‑temperature heat sources, providing excellent heat transfer via a large surface‑area primary coil.
- Suitable for larger domestic systems or small commercial applications requiring high draw‑off at mains pressure.
- Supplied as a complete unvented package and intended for installation by a G3‑qualified engineer in accordance with UK Building Regulations.
