Navien 60/100 45 Degree Flue Bend
HomeStore

Navien 60/100 45 Degree Flue Bend

Navien 60/100 45 Degree Flue Bend

$28.58

Original: $81.66

-65%
Navien 60/100 45 Degree Flue Bend—

$81.66

$28.58

The Story

The Navien 60/100 45 Degree Flue Bend is a genuine Navien flue elbow that introduces a 45° directional change into a 60/100mm concentric flue run. Built to fit the same push-fit system used across the Navien NCB gas combi and system boiler range, it lets installers route the flue around structural obstacles, offset a termination point, or transition between horizontal and angled sections without introducing a full 90° turn.
45°
Bend Angle
60/100mm
Flue Diameter
0.23 kg
Weight
PP
Material
White
Colour
1
Elbow Equivalent
Gas Safe Installation Requirement
Flue components must only be fitted by a Gas Safe registered engineer as part of a compliant flue system. Each bend reduces the maximum permitted straight flue run — consult the boiler's installation manual to confirm the total permitted flue length after adding this component.
Compatibility
This bend is designed for Navien's 60/100mm concentric flue system, used across the current NCB gas combi and system boiler range. Confirm your boiler model uses the same 60/100mm flue diameter before ordering — larger-output Navien models may specify an 80/125mm system instead.
Why This Component
Precise 45° Routing
A 45° angle offers a gentler directional change than a 90° elbow, useful for gradually offsetting a flue run around joists, beams, or other obstacles while minimising flow resistance.
Durable PP Construction
Manufactured from durable plastic (PP), matching the material used throughout the Navien 60/100 flue range for consistent long-term weather and condensate resistance.
Push-Fit Compatibility
Designed to integrate seamlessly with the wider Navien 60/100 flue accessory range, including straight extensions, 90° bends, and terminal kits.
Compact and Lightweight
At just 0.23kg and 150 x 100 x 100mm, the bend is easy to handle and fit in tight roof voids or service cupboards.
Technical Specification
General
Article number GXXX002198
Product type Flue bend / elbow, 45°
Flue diameter 60/100mm concentric
Material Polypropylene (PP)
Colour White
Dimensions & Weight
Length 150 mm
Width 100 mm
Depth 100 mm
Weight 0.23 kg
Frequently Asked Questions
Will this bend fit any Navien boiler?
It is designed for Navien's 60/100mm concentric flue system, used across the current NCB gas boiler range. Check your specific boiler's flue diameter in its installation manual before ordering, as larger-output models may use an 80/125mm system.
Does adding this bend reduce my maximum flue length?
Yes. Every elbow in a flue run reduces the total permitted straight-pipe length. Refer to your boiler's installation manual for the length deduction per bend.
Can I fit this flue component myself?
No. Flue installation and modification must be carried out by a Gas Safe registered engineer to ensure the completed system remains compliant and safe.
Is this bend suitable for both horizontal and vertical flue runs?
Yes, a 45° bend can be used to redirect the flue in either horizontal or vertical sections of the system, subject to the boiler manufacturer's routing rules.

Description

The Navien 60/100 45 Degree Flue Bend is a genuine Navien flue elbow that introduces a 45° directional change into a 60/100mm concentric flue run. Built to fit the same push-fit system used across the Navien NCB gas combi and system boiler range, it lets installers route the flue around structural obstacles, offset a termination point, or transition between horizontal and angled sections without introducing a full 90° turn.
45°
Bend Angle
60/100mm
Flue Diameter
0.23 kg
Weight
PP
Material
White
Colour
1
Elbow Equivalent
Gas Safe Installation Requirement
Flue components must only be fitted by a Gas Safe registered engineer as part of a compliant flue system. Each bend reduces the maximum permitted straight flue run — consult the boiler's installation manual to confirm the total permitted flue length after adding this component.
Compatibility
This bend is designed for Navien's 60/100mm concentric flue system, used across the current NCB gas combi and system boiler range. Confirm your boiler model uses the same 60/100mm flue diameter before ordering — larger-output Navien models may specify an 80/125mm system instead.
Why This Component
Precise 45° Routing
A 45° angle offers a gentler directional change than a 90° elbow, useful for gradually offsetting a flue run around joists, beams, or other obstacles while minimising flow resistance.
Durable PP Construction
Manufactured from durable plastic (PP), matching the material used throughout the Navien 60/100 flue range for consistent long-term weather and condensate resistance.
Push-Fit Compatibility
Designed to integrate seamlessly with the wider Navien 60/100 flue accessory range, including straight extensions, 90° bends, and terminal kits.
Compact and Lightweight
At just 0.23kg and 150 x 100 x 100mm, the bend is easy to handle and fit in tight roof voids or service cupboards.
Technical Specification
General
Article number GXXX002198
Product type Flue bend / elbow, 45°
Flue diameter 60/100mm concentric
Material Polypropylene (PP)
Colour White
Dimensions & Weight
Length 150 mm
Width 100 mm
Depth 100 mm
Weight 0.23 kg
Frequently Asked Questions
Will this bend fit any Navien boiler?
It is designed for Navien's 60/100mm concentric flue system, used across the current NCB gas boiler range. Check your specific boiler's flue diameter in its installation manual before ordering, as larger-output models may use an 80/125mm system.
Does adding this bend reduce my maximum flue length?
Yes. Every elbow in a flue run reduces the total permitted straight-pipe length. Refer to your boiler's installation manual for the length deduction per bend.
Can I fit this flue component myself?
No. Flue installation and modification must be carried out by a Gas Safe registered engineer to ensure the completed system remains compliant and safe.
Is this bend suitable for both horizontal and vertical flue runs?
Yes, a 45° bend can be used to redirect the flue in either horizontal or vertical sections of the system, subject to the boiler manufacturer's routing rules.
Navien 60/100 45 Degree Flue Bend | AIZO Quality Heating